Online purchasing option is temporarily disabled. Please send request to sales (at)

Measuring only 37mm by 39mm, the MYC-Y6ULX CPU Module is covered with shield and powered by NXP i.MX 6UltraLite / 6ULL processor based on the ARM Cortex-A7 architecture. With a choice of G2 and Y2 sub family processors running at 528MHz and integrated with 256MB DDR3 and 256MB Nand Flash (4GB eMMC Flash is optional), the MYC-Y6ULX module delivers high performance with ultra-efficient power that targets Industry Control, Communications, HMI, Smart Healthcare and Internet of Things (IoT) applications. It carries out as many as peripheral signals and IOs through 1.0mm pitch 140-pin stamp hole expansion interface to allow customer’s extension for their next embedded design. The module is ready to run Linux and can support industrial operating temperature range from -40 to +85 Celsius.

MYIR also offers a development board MYD-Y6ULX which is built around the MYC-Y6ULX CPU Module with a specially designed base board. A variety of peripheral interfaces have been brought out to the base board through headers and connectors including serial ports, two USB Host, one USB OTG, two 10/100Mbps Ethernets, CAN, Camera, LCD, Audio, TF card as well as a Mini PCIe interface for 4G LTE Module. The board also has an integrated WiFi Module with external antenna to allow wireless communications. Along with some cable accessories, the MYD-Y6ULX is a complete evaluation platform and reference design for development based on i.MX 6UL/6ULL processors.

Mechanical Parameters:

Dimensions: 37mm x 39mm

PCB Layers: 8-layer design

Power supply: 3.3V/0.3A

Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)


528MHz NXP i.MX 6UltraLite / i.MX 6ULL ARM Cortex-A7 processor 

(MCIMX6G2CVM05AB or MCIMX6Y2DVM05AA by default)


256MB DDR3 SDRAM (supports up to 1GB)

256MB Nand Flash (4GB eMMC Flash is optional)

Peripherals and Signals Routed to Pins ( MYC-Y6ULX pin-out description):

One 10/100M Ethernet PHY

1.0mm pitch 140-pin stamp hole expansion interface

- 2 x 10/100Mbps Ethernet

- 8 x Serial ports

- 4 x I2C

- 2 x CAN

- 4 x SPI

- 8 x ADC

- 8 x PWM

- 3 x I2S

- 1 x Parallel Camera Sensor Interface

- 1 x JTAG

- 1 x 24-bit LCD interface 

- Up to 97 x GPIOs

Note: the peripheral signals brought out to the expansion interface are listed in maximum number. Some signals are reused. Please refer to the processor datasheet.

OS Support:

Linux 4.1.15

MYC-6ULX CM (industrial) / i.MX 6UL/6ULL Series CPU Module

  • Manufacturer: MYIRTECH
  • Manufacturer Part Number: MYC-Y6ULY2-256N256D-50-I
  • Quantity Available: 100
  • Factory Stock **
  • Lead-time: 7-10 Business Days
  • ** For quantities greater then shown above, please contact us for Availability, Pricing and Lead-Time
  • $ 21.00 USD