The MYD-Y6ULX development board is a complete evaluation platform for NXP’s i.MX 6UltraLite / 6ULL processor family, which can operate at 528 MHz and features the most efficient ARM Cortex-A7 core, providing various memory interfaces and enhancing the flexibility and convenience of the board to connect peripheral devices. The board is ready to run Linux and supports industrial operating temperature range from -40 to +85 Celsius.

The MYD-Y6ULX development board employs the MYC-Y6ULX CPU Module as the controller board by populating the CPU Module on its base board through 1.0mm pitch 140-pin stamp hole interface. The MYC-Y6ULX CPU Module is mounted with a shield cover and integrated with core components including i.MX 6UltraLite / 6ULL processor, 256MB DDR3, 256MB Nand Flash or optional 4GB eMMC and Ethernet PHY. The base board has extended rich peripherals through connectors and headers like Serial ports, USB, Ethernet, CAN, Micro SD card, WiFi module, LCD/Touch screen, Camera, Audio as well as a Mini PCIe interface for optional USB based 4G LTE module. It is a versatile platform and solid reference design delivered with necessary cable accessories and detailed documentations ideal for prototype and evaluation based on i.MX 6UL/6ULL solutions.

Mechanical Parameters:

Dimensions: 105mm x 140mm (base board), 37mm x 39mm (CPU Module)

PCB Layers: 4-layer design (base board), 8-layer design (CPU Module)

Power supply: +12V/1.5A (base board), +3.3V/0.3A (CPU Module)

Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

Processor:

528MHz NXP i.MX 6UltraLite / i.MX 6ULL ARM Cortex-A7 processor 

(MCIMX6G2CVM05AB or MCIMX6Y2DVM05AA by default)

Memory:

256MB DDR3 SDRAM (supports up to 1GB)

256MB Nand Flash (4GB eMMC Flash is optional)

Peripherals and Signals Routed to Pins:

( MYC-Y6ULX pin-out description)

One 10/100M Ethernet PHY

1.0mm pitch 140-pin stamp hole expansion interface

- 2 x 10/100Mbps Ethernet

- 8 x Serial ports

- 4 x I2C

- 2 x CAN

- 4 x SPI

- 8 x ADC

- 8 x PWM

- 3 x I2S

- 1 x Parallel Camera Sensor Interface

- 1 x JTAG

- 1 x 24-bit LCD interface 

- Up to 97 x GPIOs

Serial ports:

- 1 x Debug serial port (TTL)

- 1 x RS485 serial port (with isolation)

- 1 x 3-wire RS232 serial port (with isolation)

USB:

- 2 x USB2.0 Host ports

- 1 x Micro USB2.0 OTG ports

1 x Mini PCIe interface (for optional USB based 4G LTE module)

1 x SIM card socket

1 x SDIO based WiFi module

2 x External antenna interfaces (one for WiFi module and one for 4G LTE module)

2 x 10/100 Mbps Ethernet interfaces

1 x Camera interface

1 x CAN interface (with isolation)

1 x Micro SD card slot

1 x LCD interface (16-bit true color, supports optional 4.3-inch and 7-inch TFT LCD)

Battery backed RTC

Audio input/output port (3.5mm jack)

3 x Buttons (1 x Reset button, 1 x User button, 1 x ON/OFF button)

2 x LEDs (1 x power indicator LED, 1 x user-defined LED)

1 x 2.0mm 20-pin male expansion connector

- 1 x SPI

- 1 x I2C

- 2 x UART

- 10 x GPIO

OS Support:

Linux 4.1.15