Online purchasing option is temporarily disabled. Please send request to sales (at) line-com.com


The MYD-C437X-PRU Development Board is a complete evaluation platform especially designed for users to take full advantages of the Programmable Real-time Unit (PRU) as well as the 3D graphics acceleration features from Texas Instruments (TI) Sitara AM437x ARM Cortex-A9 processors. It can support -40 to +85 Celsius extended temperature operation and is ideal for industrial communications, industrial control, and industrial drives applications.


The MYD-C437X-PRU development board employs the MYC-C437X CPU Module as the core controller board which is mounted onto the MYD-C437X-PRU base board through two 0.8mm pitch 2*100-pin board-to-board connectors. The CPU Module has the core components AM437x processor, 512MB DDR3, 4GB eMMC flash, 32KB EEPROM, Ethernet PHY and PMIC integrated on board. The base board has additionally extended a rich set of peripherals through headers and connectors from the SOM and some extended controller chips including three serial ports, one USB Host ports, one Mini USB Device port, one Gigabit Ethernet, two 10/100Mbps Ethernet ports from the PRU-ICSS subsystems, one CAN, one RS485, one Camera interface, one Micro SD, LCD, Touch screen and more others.


The AM437x processor family consists of 4 pin-pin compatible devices (AM4376, AM4377, AM4378 and AM4379) with various options including speed grades, packages, graphics and peripherals. MYIR delivers the MYD-C437X-PRU board with AM4377 processor by default which is able to support EtherCAT through two PRU-ICSS Ethernet ports and run TI SYS/BIOS v6.45 Real-time Operating System.


The MYD-C437X-PRU board comes with necessary cable accessories and a product disk containing the Linux 4.1.18 and TI RTOS (SYS/BIOS 6.45) software packages and detailed documents. The complete platform provides a quick AM437x starter kit for users when getting the goods out-of-the-box right away.


Features:


Mechanical Parameters:

Dimensions: 150mm x 105mm (base board), 60mm x 45mm (CPU Module)

PCB Layers: 4-layer design (base board), 8-layer design (CPU Module)

Power supply: +12V/1.5A (base board), +5V/0.33A (CPU Module)

System static power: 12V/0.35A (base board + CPU module) at the most

Working temperature: -40~85 Celsius (industrial grade)


Processor:

TI AM437x (AM4376, AM4377, AM4378 and AM4379)

- Up to 1GHz Sitara ARM Cortex-A9 32-Bit RISC processor

- POWERVR SGX Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects

- Single-cycle vector floating point (VFP)

- Dual camera and display processing subsystem

- Cryptographic acceleration and secure boot

- PRU-ICSS enables simultaneous industrial Ethernet protocols and motor feedback protocols

- Support for 32 bit LPDDR2/DDR3/DDR3L

- Low power: ~5mW deep sleep and < 0.1mW RTC-only

- Simplified power sequence for flexible power design


Memory:

512MB DDR3 SDRAM (256MB is optional)

4GB eMMC Flash (reserved 256/512MB Nand Flash design)

16MB QSPI Flash (reserved design, not soldered)

32KB EEPROM


Peripherals and Signals Routed to Pins:

Power Management IC (TPS65218B1RSLR)

Gigabit Ethernet PHY

One power indicator (Red LED)

One user LED (Green)

Two 0.8mm pitch 100-pin board-to-board expansion connectors can carry out interfaces below:

- 2 x USB

- 6 x Serial ports

- 2 x I2C

- 2 x CAN

- 2 x SPI

- 14 x ADC (8 channels from ADC1 and 6 channels from ADC0)

- 3 x SDIO

Serial ports:

- 1 x 3-wire RS232 Debug serial port

- 1 x 5-wire RS232 serial port (J14)

- 1 x 5-wire RS232 serial port (J14)

- 1 x RS485 (with isolation)

USB:

- 1 x USB 2.0 Host port

- 1 x Mini USB 2.0 Device port

1 x Gigabit Ethernet interface

2 x 10/100 Mbps PRU-ICSS Ethernet interfaces

1 x CAN interface (with isolation)

1 x TF card slot

1 x 16-bit LCD interface

1 x 24-bit LCD interface

1 x Camera interface (0.5mm pitch 30-pin FPC connectors)

1 x 4-wire resistive touch screen interface

1 x 2.54mm pitch 14-pin JTAG interface

4 x Buttons (1 x Reset button, 1 x PMIC, 2 x User buttons)

1 x Power indicator (Red LED)

3 x User LEDs (Blue)

3 x 2.0mm 20-pin expansion connectors

- 8 x ADC

- 2 x SPI

- 1 x I2C

- 2 x UART

- PRU-UART (supports PROFIBUS)

- 2 x EnDat

- 2 x eQEP

- eHRPWM


* The LCD display function cannot be used with the EtherCAT function at the same time due to reused signals.

* The LCD interface can be either selected to use the 16-bit LCD interface or 24-bit LCD interface.


OS Support:

Linux 4.1.18

SYS/BIOS 6.45 (TI-RTOS)

MYD-C4377 DB (industrial) / AM437x Series Development Board

  • Manufacturer: MYIRTECH
  • Manufacturer Part Number: MYD-C4377-4E512D-100-I-PRU
  • Quantity Available: 100
  • Factory Stock **
  • Lead-time: 7-10 Business Days
  • ** For quantities greater then shown above, please contact us for Availability, Pricing and Lead-Time
  • $ 189.00 USD