The MCC-SAMA5D3X-C CPU Module is an industrial SOM (System-on-Module) equipped with Atmel’s ARM Cortex-A5 SAMA5D3 series microprocessors which can operate at up to 536MHz. The module integrates the core components on board including 512MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Gigabit Ethernet PHY. It has two 2.0mm pitch 80-pin male pin header connectors and two 2.0mm pitch 34-pin pin header interfaces to bring out all the I/O signals from the CPU Module. It is a Linux and Android ready-to-run module and supports -40 to +85 Celsius Extended Temperature Operation for Industrial Applications.

The MCC-SAMA5D3X-C series CPU Modules allow five selections of Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36 processors. All five modules are sharing the same circuit design with minor configuration settings. The MCC-SAMA5D3X-C CPU Module series have following models:

MCC-SAMA5D31-C CPU Module for Atmel SAMA5D31

MCC-SAMA5D33-C CPU Module for Atmel SAMA5D33

MCC-SAMA5D34-C CPU Module for Atmel SAMA5D34

MCC-SAMA5D35-C CPU Module for Atmel SAMA5D35

MCC-SAMA5D36-C CPU Module for Atmel SAMA5D36

Customers can design their own base board using MYIR’s MCC-SAMA5D3X-C CPU modules as the core components to extend peripheral functions by headers to connectors on their base boards. MYIR also designed one base board for customers’ evaluation, prototype and creating applications. The development board is called MYD-SAMA5D3X-C which is using the MCC-SAMA5D3X-C as controller board and extends many of peripherals on the base board.

Features:

Mechanical Parameters:

Dimensions: 82mm x 55mm

PCB Layers: 8-layer design

Power supply: +3.3V/2A

Working temperature: -40~85 Celsius

Processor:

Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36

- ARM Cortex-A5 processor, operates at up to 536MHz (850DMIPS)

- 16KB data Cache,16KB instruction Cache

- 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA)

- Fully Integrated MMU and Floating Point Unit (VFPv4)

- 128KB of SRAM and 160KB of ROM

Memory:

265MB DDR2 SDRAM

256MB Nand Flash

4MB Data Flash

64KB EEPROM

Peripherals and Signals Routed to Pins:

On-board Gigabit Ethernet PHY

One power indicator (Red LED)

One user LED (Blue)

Two 2.0mm pitch 80-pin male pin headers and two 2.0mm pitch 34-pin expansion interfaces can carry out peripherals below: 

- 1 x Gigabit Ethernet 

- 3 x USB (2 x high-speed USB Host, 1 x Mini USB Host/Device)

- Up to 7 x Serial ports

- 2 x I2C

- 2 x CAN

- 1 x SPI

- 12 x ADC (12-bit)

- BUS (can be extended to 16-bit Data Bus and 8-bit Address Bus)

OS Support

Linux 3.6.9

Android 4.0.4