Online purchasing option is temporarily disabled. Please send request to sales (at)

The MYD-JA5D2X Development Board is a complete evaluation platform for Atmel’s SAMA5D2 (26/27) ARM Cortex-A5 processor which supports multiple memories, including latest-generation technologies such as DDR3, LPDDR3, and QSPI Flash and is integrated with rich peripherals including the LCD & Touch controller, Camera interface, EMAC, USB HSIC and Safety IP, capable of running at up to 500MHz. The MYD-JA5D2X development boards is consist of a CPU module MYC-JA5D2X and a base board MYB-JA5D2X connected via one 200-Pin SODIMM interface. It is designed to be a complete design reference for embedded developing on the SAMA5D2X processor and designs based on MYC-JA5D2X CPU Module.

The MYC-JA5D2X CPU Module has integrated the core components including the SAMA5D2 processor, 256MB DDR3, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and 100M Ethernet PHY on board. It has been designed to support up to 512MB DDR3 and 1GB Nand Flash (or 16GB eMMC Flash) on customer demand. They can be embedded into your next design directly to speed up your time to market. A rich set of peripherals and interfaces have been brought out through headers and connectors to the MYD-JA5D2X base board including serial ports, USB Host and Device ports, one CAN port (only for SAMA5D27), one 10/100Mbps Ethernet port, RS485, TF card slot, Audio in/out, LCD, etc.

MYIR deliveries the MYD-JA5D2X Development Board with SAMA5D27 processor by default. The board comes along with Linux 4.1 software packages, necessary cable accessories as well as detailed documents to enable quick start when getting the goods out of box. It can support -40 to +85 Celsius extended temperature operation for industrial embedded applications. It is an excellent EVM (Evaluation Module) and a good reference design for extensively evaluation, fast prototyping and creating applications that require high efficient computing, display, audio, mass storage, networking, connectivity and more.


Mechanical Parameters:

Dimensions: 110mm x 135mm (base board), 67.6mm x 45mm (CPU Module)

PCB Layers: 4-layer design (base board), 8-layer design (CPU Module)

Power supply: +5V/2A (base board), +3.3V/0.5A (CPU Module)

Working temperature: -40~85 Celsius (industrial grade)

OS Support

Linux 4.1

The MYD-JA5D2X Controller Board (MYC-JA5D2X CPU Module)


Atmel SAMA5D26, SAMA5D27

- ARM® Cortex™-A5 processor, operates at up to 500MHz (785DMIPS)

- 128KB of L2 cache for system performance.

- Floating point unit (FPU) for high-precision computing and accelerated data processing.

- 10/100 MAC with IEEE1588

- Two HS High Speed USB ports (configurable as two hosts or one host and one device port) 

- One High Speed Inter-Chip Interface (HSIC) port

- One 12-bit image sensor controller with Raw Bayer support

- Graphic LCD controller with overlays for image composition

- Advanced security features to prevent counterfeiting, secure external communication, and authenticate the system

- Market-leading low power consumption



256MB Nand Flash

4MB Data Flash


Peripherals and Signals Routed to Pins

 MYC-JA5D2X Pinouts Description

On-board Ethernet PHY

One power indicator (Red LED)

One user LED (Blue)

SO-DIMM 200-pin connector brings out below peripheral signals:

- 1 x Ethernet 

- 3 x USB (1 x Host, 1 x Device, 1 x HSIC, HSIC is only for SAMA5D27)

- Up to 10 x Serial ports

- Up to 7 x I2C

- Up to 2 x CAN (only for SAMA5D27)

- Up to 7 x SPI

- Up to 2 x QSPI

- 12 x 12-bit ADC (enhanced resolution up to 14 bits)

- 4 x PWM

- 1 x 4-bit SDIO

- 1 x 24-bit LCD

- Up to 2 x SSC, compatible with I2S

- 1 x 12-bit Camera Interface

- 1 x SMC (Supports parallel external memory interface)

- Up to 97 x GPIOs

Note: Some signals are reused and listed with the maximum numbers. For detailed configuration, please refer to the document of Pin-out Description.

Serial ports

- 1 x 3-wire RS232 Debug serial port (DB9)

- 1 x 3-wire RS232 serial port (DB9)

-1 x RS485


- 1 x USB2.0 Host port

- 1 x Mini USB2.0 Device port

- 1 x USB HSIC (only for SAMA5D27, via Extension Headers)

1 x 10/100Mbps Ethernet interface

1 x CAN interface (only for SAMA5D27)

1 x TF card slot

1 x 18-bit LCD interface (supports optional 4.3-inch and 7-inch TFT LCD with resistive or capacitive touch screen)

1 x 4-wire resistive touch screen interface

1 x 8-bit Camera interface (J23, 2.0mm pitch 20-pin connectors)

1 x MIC In

1 x LINE In

1 x Stereo Audio Output port (Headphone)

1 x JTAG interface (2.54mm pitch, 20-pin connector, J16)

1 x battery backed RTC socket

4 x Buttons (Boot SEL, Reset, Wake up, User)

2 x 2.0mm pitch 20-pin Extension Headers (J7 & J21)

- 2 x SPI, 2 x UART, 1 x TWI, 1 x QSPI (some signals are reused)

1 x 2.0mm pitch 20-pin Secure IO Header (J8)

1 x FMC interface (DNP by default, on the bottom of the board)

3 x LEDs (1 x Power, 2 x User)

MYD-JA5D27 DB (industrial) / SAMA5D2X Development Board

  • Manufacturer: MYIRTECH
  • Manufacturer Part Number: MYD-JA5D27-256N256D-I
  • Quantity Available: 100
  • Factory Stock **
  • Lead-time: 7-10 Business Days
  • ** For quantities greater then shown above, please contact us for Availability, Pricing and Lead-Time
  • $ 129.00 USD