The MYC-C7Z010007S CPU Module is an industrial-grade System-on-Module (SoM) based on Xilinx Zynq-7000 family SoC available for either the XC7Z010 or XC7Z007S version. It has integrated the Zynq-7010 or Zynq-7007S device, 512MB DDR3 SDRAM, 4GB eMMC, 16MB quad SPI Flash, a Gigabit Ethernet PHY and external watchdog on board and provides 1.27mm 180-pin stamp-hole (Castellated-Hole) expansion interface to allow a large number of IO signals for ARM peripherals and FPGA IOs to be extended to your base board. The module is ready to run Linux and supports wide working temperature ranging from -40 to +85 Celsius which is ideal for industrial embedded applications.

MYIR provides a development board MYD-Y7Z010007S for evaluating the MYC-Y7Z010007S CPU Module, which employs the MYC-Y7Z010007S as the controller board by populating the CPU Module on its base board through 1.27mm pitch 180-pin stamp-hole (Castellated-Hole) interface. The base board has extended a rich set of peripheral interfaces including serial ports, USB Host port, three Gigabit Ethernet ports, CAN, TF card slot, JTAG, etc. One 2.54mm pitch 2 x 25-pin expansion header is on the base board to let more GPIOs available for further extension. MYIR offers an optional MYD-7Z010007S IO CAPE to connect to this expansion header to extend many peripherals and signals like HDMI, LCD, camera and Pmod to help user explore more functions. The 7-inch LCD Module with capacitive touch screen as well as MY-CAM011B camera module from MYIR can be supported through the IO Cape. 

Mechanical Parameters:

Dimensions 75mm x 50mm (10-layer PCB design)

Power supply 5V

Working temp. -40~85 Celsius (industrial grade)

SoC:

Xilinx XC7Z007S-1CLG400I (Zynq-7007S) or XC7Z010-1CLG400I (Zynq-7010) 

- ARM® Cortex™-A9 MPCore processor

667MHz single-core processor (up to 766MHz, for XC7Z007S)

667MHz dual-core processor (up to 866MHz, for XC7Z010) 

- Integrated Artix-7 class FPGA subsystem

with 23K logic cells, 14,400 LUTs, 66DSP slices (for XC7Z007S)

with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)  

- NEON™ & Single  Double Precision Floating Point for each processor

- Supports a Variety of Static and Dynamic Memory Interfaces

Memory:

512B DDR3 SDRAM (256MB2)

4GB eMMC

16MB QSPI Flash

Peripherals and Signals Routed to Pins:

101001000M Ethernet PHY

External watchdog

Three LEDs

- One red LED for power indicator

- One green LED for FPGA program done indicator

- One flashing green LED for system indicator 

1.27mm pitch 180-pin Stamp Hole Expansion Interface brings out below signals

- One Gigabit Ethernet

- One USB

- Two Serial ports 

- Two I2C

- Two CAN BUS

- Two SPI

 Serial ports, I2C, CAN and SPI signals in PS part can be implemented through PL pins via Emio.

- Two ADC (16-channel ADC brought out through PL pins)

- One SDIO

OS Support:

Linux 3.15.0